Leave Your Message

Complete Exit Device Installation Guide for Commercial Double Doors: Choosing the Right Hardware Configuration for Every Project

Why Many Commercial Door Projects Encounter Hardware Problems

A commercial door opening may appear straightforward on an architectural drawing, yet selecting the correct exit hardware is often one of the most overlooked decisions during the specification stage.

Many project delays are not caused by the door itself, but by choosing an exit device that does not match the opening design, fire-rating requirements, or expected traffic conditions. The consequences usually become apparent during installation or final inspection, when replacing incompatible hardware can increase both project costs and completion time.

This challenge becomes even greater for double-door openings. Unlike single-leaf doors, double doors require the hardware on both leaves to work together while meeting life-safety requirements, maintaining security, and allowing smooth daily operation.

The installation configurations presented in the XXXX Series catalog demonstrate that different double-door layouts call for different combinations of exit devices. Depending on the opening design, projects may use surface vertical rod devices, concealed vertical rod devices, rim exit devices, mortise exit devices, removable mullions, or less bottom rod configurations, with both panic-rated and three-hour fire-rated options available.

For architects, door manufacturers, distributors, and contractors, understanding these configuration options before hardware specification helps minimize redesigns and installation issues later in the project.

 01.jpg

Every Double Door Opening Is Different

There is no universal exit device suitable for every commercial application.

Although two entrances may share the same door size, their hardware requirements can vary significantly because each building serves a different purpose.

For example:

  • A hospital corridor requires uninterrupted emergency egress while supporting intensive daily traffic.
  • A school entrance must balance student safety with long-term durability.
  • A hotel exit should combine reliable emergency performance with an appearance that complements the building's interior design.
  • An industrial warehouse often prioritizes strength and ease of maintenance over aesthetics.

Because operational demands differ, hardware should be selected according to the function of the opening—not simply the dimensions of the door.

Exit Devices Are Part of an Integrated Door System

Many buyers consider an exit device as an individual product. In practice, it functions as one component within a complete commercial door assembly.

Its performance is directly influenced by factors such as:

  • Door construction
  • Frame design
  • Fire-door requirements
  • Door handing
  • Traffic direction
  • Locking method
  • Latching mechanism
  • Opening frequency

As a result, specifying an exit device should begin with evaluating the entire opening rather than comparing hardware models in isolation.

This systems-based approach is particularly important for commercial buildings where life safety, accessibility, and long-term reliability are all critical considerations.

 02.jpg

Understanding the Main Exit Device Families

Commercial exit devices are available in several structural designs, each developed for a different application. Rather than competing with one another, these designs solve different engineering challenges. The catalog illustrates four primary categories commonly used in commercial double-door projects.

Surface Vertical Rod Exit Devices

Surface Vertical Rod (SVR) devices secure the door at both the head and the sill using externally mounted rods.

Because the operating rods remain visible, these devices are widely selected for buildings where straightforward installation and convenient maintenance are priorities.

They are frequently specified for:

  • Distribution centers
  • Educational facilities
  • Public buildings
  • Warehouses
  • Large commercial entrances

Concealed Vertical Rod Exit Devices

Concealed Vertical Rod (CVR) devices achieve the same multi-point latching function while hiding the rods inside the door leaf.

This concealed construction produces a cleaner appearance and better protects the internal mechanism from accidental impact or tampering.

CVR systems are commonly chosen for projects where architectural aesthetics are as important as operational performance, including hotels, office buildings, healthcare facilities, and premium commercial developments.

The catalog includes both panic-rated and three-hour fire-rated concealed vertical rod configurations for double-door installations.

Rim Exit Devices

Instead of engaging rods at the top and bottom of the door, rim exit devices latch directly into a strike mounted on the frame or removable mullion.

Their simpler internal construction generally reduces maintenance requirements while providing dependable daily operation.

Within double-door openings, rim devices are commonly paired with removable mullions, creating a flexible solution for buildings that occasionally require a wider clear opening. The catalog illustrates this arrangement for both panic and fire-rated applications.

Mortise Exit Devices

Mortise exit devices integrate an exit device with a mortise locking mechanism installed inside the edge of the door.

This design is often selected where higher levels of security are required alongside emergency egress.

Typical applications include government facilities, universities, commercial office buildings, and institutional projects. The catalog also presents double-door layouts combining a mortise exit device with a vertical rod device, available for both standard panic doors and fire-rated openings.

The First Step Toward a Successful Specification

Selecting commercial exit hardware is rarely about choosing the "best" product. Instead, it involves identifying the configuration that best matches the opening's intended function, operational requirements, and code compliance.

Whether the project involves a pair of fire-rated doors, a double-egress corridor, or a main entrance with removable mullions, the correct hardware arrangement improves installation efficiency, enhances long-term reliability, and supports safe building evacuation.

In the following section, we will examine the most common double-door installation layouts in greater detail, explaining where each configuration performs best and the practical considerations that influence hardware selection during commercial projects.

Selecting the Right Exit Device Configuration for Different Commercial Door Applications

Once the appropriate exit device family has been identified, the next challenge is determining how it should be configured for the specific door opening.

In commercial construction, the same exit device can perform very differently depending on the opening arrangement. Door swing direction, fire compartment requirements, traffic patterns, and maintenance expectations all influence the final hardware layout.

Rather than relying on a standard hardware schedule for every project, experienced specifiers evaluate the function of each opening before selecting the most suitable combination of exit devices.

The installation examples shown in the catalog demonstrate several common layouts used in commercial buildings, ranging from double-egress corridors to removable mullion systems and mixed exit device combinations.

The following sections explain why these configurations are used and the practical situations they are designed to address.

 03.jpg

Scenario 1 – Openings with Two-Way Pedestrian Flow

In buildings where people regularly travel in opposite directions, conventional paired doors are often replaced with a double-egress arrangement.

Unlike a standard pair of doors that open toward the same side, a double-egress opening allows each door leaf to swing independently in the direction of travel. This design helps separate pedestrian movement and minimizes congestion during busy periods.

Because each leaf operates independently, the exit hardware must secure the opening without restricting the movement of the adjacent door.

To achieve this, the catalog recommends pairing identical vertical rod devices on both leaves, offering either:

  • Surface Vertical Rod (SVR) devices
  • Concealed Vertical Rod (CVR) devices

Both configurations are shown for panic doors and three-hour fire-rated doors.

Typical Project Examples

This arrangement is commonly selected for:

  • Medical centers
  • University buildings
  • Passenger terminals
  • Civic facilities
  • Large educational campuses

These buildings benefit from uninterrupted traffic flow while maintaining dependable emergency egress.

Scenario 2 – Reducing Maintenance Without Sacrificing Performance

Every additional moving component increases the likelihood of future maintenance.

For this reason, many modern commercial projects seek to simplify the door system wherever possible. One solution illustrated in the catalog is the Less Bottom Rod (LBR) configuration. Instead of engaging both the top and bottom of the door, the lower rod assembly is eliminated while the upper latching mechanism continues to secure the opening. Fire-rated versions incorporate an auxiliary fire bolt to maintain the required performance.

Why Many Projects Prefer LBR Systems

Removing the lower rod helps reduce common service issues associated with floor-mounted hardware, including contamination from dust, debris, moisture, and threshold wear.

As a result, Less Bottom Rod devices are often specified where maintenance efficiency is a priority.

Typical advantages include:

  • Simplified servicing
  • Fewer mechanical components
  • Cleaner floor conditions
  • Lower lifecycle maintenance costs
  • Reduced installation adjustments

For facilities operating around the clock, these practical benefits can translate into lower long-term operating expenses.

Scenario 3 – Providing Wide Access Without Permanent Center Supports

Certain buildings require secure double doors during normal operation while occasionally needing the entire opening available for oversized deliveries.

Installing vertical rod devices is not the only solution. The catalog presents an alternative arrangement using rim exit devices in conjunction with a removable mullion. Three-point latching devices are also illustrated for comparable applications.  During everyday operation, the removable mullion provides a stable latching point between the two door leaves.

Whenever larger equipment must pass through the opening, the mullion can be temporarily removed before being reinstalled.

Suitable Applications

This arrangement is particularly effective for:

  • Distribution centers
  • Retail developments
  • Convention facilities
  • Commercial warehouses
  • Manufacturing plants

By combining operational flexibility with dependable daily security, removable mullions remain a popular choice for many commercial projects.

Scenario 4 – Doors Opening in the Same Direction

Not every pair of commercial doors serves bidirectional traffic. 

Many entrances, particularly at the front of buildings, require both door leaves to swing in the same direction. Although this arrangement appears simpler, hardware coordination remains essential. The installation guide includes several same-direction layouts using paired surface vertical rod devices, concealed vertical rod devices, and Less Bottom Rod configurations. It also specifies that overlapping astragals should not be used with these installations.

Proper coordination between the two door leaves helps ensure reliable latching while maintaining smooth operation during daily use.

Scenario 5 – When One Hardware Type Is Not Enough

Commercial projects often involve entrances where each door leaf performs a different role.

For example, one leaf may function as the primary entrance throughout the day, while the second leaf remains inactive except during peak occupancy or emergency evacuation.

Using identical exit devices on both leaves may not always provide the most efficient solution.

To accommodate these situations, the catalog includes several mixed hardware combinations, including:

  • Rim Exit Device + Surface Vertical Rod Device
  • Rim Exit Device + Concealed Vertical Rod Device
  • Mortise Exit Device + Surface Vertical Rod Device
  • Mortise Exit Device + Concealed Vertical Rod Device

Both panic-rated and fire-rated configurations are shown.

Selecting different hardware for each leaf allows the opening to balance security, convenience, and code compliance without unnecessarily increasing project costs.

A Practical Framework for Hardware Selection

Rather than beginning with a product catalogue, experienced hardware consultants usually start by asking a series of practical questions about the opening itself.

For example:

  • Will both door leaves be used equally?
  • Does the opening require fire protection?
  • Is appearance a design priority?
  • Will maintenance staff have easy access to the hardware?
  • Are oversized deliveries expected?
  • How frequently will the doors be operated?
  • Does the building experience directional or bidirectional pedestrian flow?

Answering these questions first makes it much easier to determine which exit device configuration is appropriate.

In many cases, the success of a commercial door system depends less on the individual hardware product and more on how well the overall configuration matches the operational requirements of the building.

Comparing Rim, Surface Vertical Rod, Concealed Vertical Rod, and Mortise Exit Devices — Which Solution Best Fits Your Commercial Project?

Selecting an exit device is not simply about choosing a model from a catalogue. Each type of exit device is engineered with a different locking mechanism, installation method, and operational purpose. Understanding these differences allows architects, contractors, and door manufacturers to specify hardware that aligns with the functional requirements of a building rather than relying solely on price or familiarity.

The installation guide demonstrates multiple combinations of Rim, Surface Vertical Rod (SVR), Concealed Vertical Rod (CVR), and Mortise Exit Devices for double-door openings, indicating that different project conditions require different hardware strategies rather than a universal solution.

This section compares these four major exit device families from an engineering and project specification perspective.

Rim Exit Devices: A Practical Choice for Simplicity and Reliability

Among commercial exit hardware, rim exit devices are often considered the simplest mechanical solution.

Instead of using rods that extend toward the top or bottom of the door, a rim device engages a strike installed on the frame or on a removable mullion. The relatively straightforward internal mechanism makes installation easier and reduces the number of moving components.

Because of this design, rim exit devices are widely specified in commercial buildings where maintenance efficiency and dependable daily operation are primary concerns.

Typical Applications

Rim exit devices are commonly selected for:

  • Office buildings
  • Educational facilities
  • Retail stores
  • Government buildings
  • Commercial renovation projects

When installed on double doors, they are frequently combined with removable mullions to provide secure latching while preserving the option of creating a full-width opening when required. The installation guide illustrates this arrangement for both panic and fire-rated applications.

Advantages

Compared with more complex exit hardware, rim devices offer several practical benefits:

  • Straightforward installation
  • Fewer mechanical components
  • Simplified maintenance
  • Lower service costs
  • Reliable long-term performance

For facilities where ease of servicing is an important consideration, rim devices remain one of the most cost-effective choices.

Surface Vertical Rod Exit Devices: Engineered for Large and High-Traffic Openings

Surface Vertical Rod (SVR) exit devices secure the door using rods mounted on the face of the door that engage both the head and the threshold.

This dual-point latching arrangement distributes closing forces more evenly across the door, helping maintain stability on wider or heavier openings.

Because the rods remain visible, maintenance personnel can easily inspect the mechanism and replace components when necessary.

Ideal Project Environments

SVR devices are frequently specified for:

  • Schools
  • Airports
  • Shopping malls
  • Industrial facilities
  • Logistics centers
  • Public buildings

These environments often experience thousands of opening cycles each week, making durability and serviceability important specification criteria.

Key Benefits

Surface-mounted rod systems provide:

  • Strong multi-point locking
  • High structural stability
  • Convenient inspection
  • Faster maintenance access
  • Compatibility with large commercial doors

The catalog presents SVR configurations for double-egress doors, same-direction openings, Less Bottom Rod designs, and mixed hardware combinations, reflecting their versatility across different commercial applications.

Concealed Vertical Rod Exit Devices: Combining Performance with Architectural Design

While concealed vertical rod devices operate using the same basic latching principle as surface-mounted systems, the operating rods are hidden inside the door leaf.

This design offers a cleaner appearance while protecting internal components from accidental impact and unauthorized tampering.

For projects where aesthetics influence the overall building design, concealed hardware is often preferred.

Suitable Applications

CVR devices are commonly specified for:

  • Premium office developments
  • Hotels
  • Healthcare facilities
  • Corporate headquarters
  • Luxury residential buildings
  • Government projects

Because the operating mechanism is concealed, the visible hardware is minimized, helping designers achieve a more refined appearance.

Engineering Advantages

Compared with exposed rod systems, concealed vertical rod devices provide:

  • Improved architectural aesthetics
  • Protected internal mechanisms
  • Reduced risk of mechanical damage
  • Cleaner door surfaces
  • Consistent emergency egress performance

The installation guide includes concealed vertical rod configurations for double-egress openings, same-direction doors, Less Bottom Rod systems, and mixed installations, demonstrating their adaptability across various commercial door layouts.

Mortise Exit Devices: Integrating Security with Emergency Egress

Mortise exit devices differ from rim and vertical rod systems by incorporating a mortise lock mechanism within the edge of the door.

This configuration combines emergency exit functionality with enhanced access control, making it suitable for buildings that require both life safety and higher levels of security.

Rather than relying solely on latching at the frame, the mortise lock provides a robust locking solution while maintaining rapid egress from the inside.

Typical Project Applications

Mortise exit devices are frequently installed in:

  • Government buildings
  • Universities
  • Financial institutions
  • Corporate offices
  • Healthcare facilities
  • High-security commercial developments

The installation guide also illustrates combinations pairing a mortise exit device with either a surface or concealed vertical rod device for double-door applications.

Primary Advantages

Mortise exit devices are valued for:

  • Enhanced security performance
  • Smooth locking operation
  • Durable internal construction
  • Compatibility with commercial access control systems
  • Professional appearance for premium projects

Comparing the Four Exit Device Types

Each exit device family addresses different project priorities. Rather than identifying one product as universally superior, successful hardware specification depends on matching the product to the building's operational needs.

Exit Device Type

Best Suited For

Main Strength

Typical Consideration

Rim Exit Device

Office buildings, retail, renovation projects

Simple installation and maintenance

Often used with removable mullions on double doors

Surface Vertical Rod

High-traffic and large openings

Multi-point latching and structural stability

Visible rods influence appearance

Concealed Vertical Rod

Premium architectural projects

Hidden mechanism and clean aesthetics

Door preparation is generally more complex

Mortise Exit Device

High-security commercial buildings

Integrated locking and security

Requires mortise door preparation

Instead of selecting hardware based solely on familiarity or initial cost, project teams should evaluate how each design aligns with the building's daily operation, maintenance strategy, and security objectives.

Beyond Product Selection: Thinking About the Entire Opening

Experienced hardware consultants rarely begin by asking, "Which exit device should we use?"

A more effective question is: "How will this opening function over the next twenty years?"

The answer involves much more than hardware type. Factors such as:

  • Daily traffic volume
  • Fire-rating requirements
  • Access control integration
  • Maintenance resources
  • Door construction
  • Architectural expectations
  • Future operational changes

all influence the most appropriate hardware specification.

By evaluating these considerations early in the project, architects and contractors can reduce installation revisions, improve long-term reliability, and simplify future maintenance.

Fire-Rated Exit Devices for Commercial Double Doors — Key Design Considerations and Best Practices

In commercial construction, not every exit door is required to provide fire resistance. However, when an opening forms part of a fire compartment or a protected escape route, the exit hardware becomes a critical element of the fire door assembly rather than simply an access device.

Unlike standard panic hardware, fire-rated exit devices must continue to secure the door after repeated use while helping maintain the integrity of the fire-rated opening during a fire event. As a result, selecting hardware for fire doors requires careful consideration of both door configuration and hardware compatibility.

The installation guide includes dedicated three-hour fire-rated configurations for every major double-door arrangement, including Surface Vertical Rod (SVR), Concealed Vertical Rod (CVR), Rim Exit Devices, Mortise Exit Devices, and Less Bottom Rod systems, illustrating that fire-rated hardware is available across a wide range of commercial applications rather than being limited to a single product type.

Why Fire-Rated Doors Require Different Hardware

Although panic-rated and fire-rated exit devices may appear similar, they are designed to satisfy different functional objectives.

A panic device is intended to provide rapid and intuitive egress during an emergency by allowing occupants to release the latch with a single push.

A fire-rated exit device, on the other hand, must also ensure that the door returns to its closed and latched position after each operation. This automatic latching function is essential because an unlatched fire door cannot effectively help contain smoke and fire within a compartment.

For this reason, fire-rated openings should always be treated as complete door systems in which the door leaf, frame, hinges, closing device, latch, and exit hardware work together as one assembly.

 04.jpg

Fire-Rated Hardware Is Available Across Multiple Door Configurations

One common misconception is that fire-rated openings require a completely different door design.

In reality, many standard commercial door layouts can also be specified as fire-rated assemblies, provided the appropriate hardware combinations are selected.

The installation guide demonstrates three-hour fire-rated options for several common configurations, including:

  • Double egress openings using paired Surface Vertical Rod devices
  • Double egress openings using paired Concealed Vertical Rod devices
  • Same-direction double doors
  • Rim exit devices with removable mullions
  • Mortise and vertical rod combinations
  • Less Bottom Rod configurations with additional fire hardware

This flexibility allows architects and hardware consultants to maintain consistent door operation across a building while meeting the requirements of protected escape routes.

Understanding Less Bottom Rod Fire Door Systems

The Less Bottom Rod (LBR) configuration has become increasingly popular in modern commercial projects because it simplifies maintenance and improves accessibility around the threshold.

However, eliminating the lower rod changes the way the inactive leaf is secured.

For fire-rated applications, the catalog specifies that these configurations are used together with an Auxiliary Fire Bolt.

The additional fire bolt provides supplementary latching when the door closes, helping maintain the integrity of the opening without requiring a conventional bottom rod.

Why Many Projects Prefer This Design

Compared with traditional bottom-latching systems, LBR fire-door configurations offer several operational advantages:

  • Reduced wear around the threshold area
  • Fewer exposed moving components
  • Simplified floor cleaning
  • Lower maintenance frequency
  • Improved accessibility for wheeled traffic

These characteristics make LBR systems particularly attractive for buildings with continuous pedestrian movement.

Selecting the Appropriate Fire-Rated Configuration

The most suitable fire-rated exit device depends on how the opening will be used throughout the life of the building.

Rather than focusing on a single product model, experienced hardware consultants evaluate the overall function of the opening.

Double Egress Corridors

Where occupants travel in opposite directions, paired vertical rod devices provide independent operation while maintaining secure latching for each leaf.

These configurations are commonly found in healthcare facilities, educational buildings, and transportation hubs.

Large Main Entrances

When both leaves open in the same direction, vertical rod devices offer dependable multi-point locking for larger commercial entrances.

Depending on the architectural requirements, either surface-mounted or concealed rod systems may be selected.

Flexible Service Access

Facilities that occasionally require oversized equipment to pass through the opening often benefit from removable mullions paired with rim exit devices.

During everyday operation, the mullion provides a secure center latching point. When additional clearance is required, it can be temporarily removed without replacing the exit hardware.

High-Security Openings

Where controlled access is combined with fire protection, mortise exit devices can be paired with vertical rod devices to achieve both security and reliable emergency egress.

The installation guide includes these mixed configurations for three-hour fire-rated openings.

Fire Door Performance Depends on the Entire Hardware Package

One of the most common specification mistakes is evaluating hardware components individually rather than as part of an integrated fire door assembly.

For a fire-rated opening to perform as intended, compatibility between all door hardware components is essential.

A typical commercial fire door assembly may include:

  • Fire-rated exit device
  • Fire-rated door closer
  • Fire-rated hinges or pivots
  • Fire-rated lock or latch mechanism
  • Door coordinator (where required)
  • Astragal or meeting stile components
  • Frame and door leaf certified as a complete assembly

Selecting certified components that are designed to work together helps simplify specification, installation, and long-term maintenance.

Common Specification Considerations

Before finalizing hardware for a fire-rated opening, project teams typically review several practical questions:

Does the opening require emergency egress only, or emergency egress plus fire compartmentation?

Understanding the primary function of the opening determines whether standard panic hardware or a fire-rated configuration is appropriate.

How will the doors operate during normal building use?

Traffic direction influences whether the opening should use a double-egress arrangement, same-direction pair, or a mixed hardware configuration.

Will maintenance access be important?

Projects expecting intensive daily use may benefit from hardware arrangements that simplify inspection and reduce servicing requirements, such as Less Bottom Rod systems.

Are architectural aesthetics a priority?

If exposed hardware should be minimized, concealed vertical rod devices may provide a more suitable solution without changing the overall operating principle.

Looking Beyond Compliance

Successful fire door specification is not simply about satisfying minimum code requirements.

The best hardware solutions also improve everyday usability, reduce maintenance costs, and extend the service life of the door system.

By selecting the appropriate exit device configuration at the design stage, project teams can avoid unnecessary modifications during installation while providing safer, more reliable commercial entrances throughout the building's operational life.

A Practical Specification Guide for Commercial Exit Devices — Making the Right Choice for Every Project

Choosing an exit device is only one step in specifying commercial door hardware. The broader objective is to create a complete opening solution that supports occupant safety, complies with project requirements, and performs reliably throughout the building's service life.

Throughout this guide, we have explored different exit device families, common double-door configurations, and fire-rated applications. One conclusion becomes clear: there is no single exit device that is suitable for every commercial project. Instead, successful specifications are based on understanding how the opening will be used and selecting hardware that matches those operational requirements.

The installation guide reflects this principle by presenting multiple hardware combinations—including Surface Vertical Rod, Concealed Vertical Rod, Rim, and Mortise Exit Devices—for different double-door arrangements rather than recommending one universal solution.

This final section provides a practical framework that architects, contractors, distributors, and door manufacturers can use when specifying exit hardware for commercial buildings.

Step 1: Start with the Function of the Opening

Before comparing hardware models, begin by identifying the purpose of the door.

A loading entrance, an emergency stairwell, a hospital corridor, and a school classroom exit may all use double doors, yet each opening operates under different conditions.

Ask questions such as:

  • Is this a primary entrance or an emergency exit?
  • Will the opening experience continuous pedestrian traffic?
  • Are both door leaves active during daily operation?
  • Does the building require controlled access from the exterior?
  • Is the opening part of a fire-rated compartment?

Answering these questions establishes the functional requirements before hardware selection begins.

Step 2: Evaluate the Door Configuration

The physical arrangement of the opening determines which exit device configurations are appropriate.

The installation guide illustrates several common layouts, including:

  • Double-egress openings
  • Same-direction door pairs
  • Removable mullion systems
  • Less Bottom Rod configurations
  • Mixed hardware combinations using Rim, Vertical Rod, and Mortise Exit Devices

Rather than selecting hardware first, determine which opening configuration best supports the building's operational needs.

Step 3: Match the Hardware to Building Traffic

Traffic volume directly influences hardware performance over time.

Buildings with thousands of daily users place far greater demands on exit devices than facilities with occasional pedestrian movement.

High-Traffic Buildings

Examples include:

  • Airports
  • Hospitals
  • Universities
  • Shopping malls
  • Transportation terminals

These projects often prioritize:

  • Durable construction
  • Stable multi-point latching
  • Easy maintenance
  • Reliable long-term performance

Vertical rod exit devices are commonly considered for these demanding environments because they provide secure engagement at multiple points.

Medium-Traffic Commercial Buildings

Examples include:

  • Office buildings
  • Hotels
  • Government facilities
  • Corporate headquarters

For these projects, architects often balance operational reliability with appearance.

Depending on the design objectives, concealed vertical rod or mortise exit devices may offer an appropriate combination of performance and aesthetics.

Flexible Access Facilities

Warehouses, exhibition centers, and logistics facilities frequently require oversized equipment to move through the opening.

In these situations, removable mullions combined with rim exit devices offer flexibility while maintaining dependable day-to-day security. The installation guide includes this arrangement for both panic-rated and fire-rated applications.

Step 4: Consider Long-Term Maintenance

Hardware selection should account not only for installation but also for years of operation.

Many commercial buildings remain in service for decades, making lifecycle maintenance an important factor.

Project teams should evaluate:

  • Accessibility of internal components
  • Replacement part availability
  • Inspection requirements
  • Cleaning around thresholds
  • Expected servicing frequency

For example, Less Bottom Rod configurations reduce the number of components located at floor level, which can simplify maintenance in busy facilities. Fire-rated versions of this configuration incorporate an auxiliary fire bolt as shown in the installation guide.

Step 5: Balance Appearance with Performance

Commercial hardware contributes not only to functionality but also to the overall architectural impression of a building.

Visible hardware may be acceptable in industrial environments, while premium commercial developments often prefer a more integrated appearance.

Typical design preferences include:

Building Type

Common Hardware Preference

Industrial facilities

Surface Vertical Rod Devices

Healthcare buildings

Concealed Vertical Rod Devices

Hotels

Concealed Vertical Rod or Mortise Exit Devices

Office buildings

Rim or Concealed Vertical Rod Devices

Government buildings

Mortise or Vertical Rod Devices

The appropriate choice depends on the project's architectural intent as well as operational requirements.

Common Specification Mistakes to Avoid

Many specification issues arise not because of product quality but because the selected hardware does not suit the application.

Some of the most common mistakes include: Selecting hardware based only on initial cost

The least expensive option may result in higher maintenance expenses over the building's lifetime.

Ignoring future maintenance

Hardware should remain accessible for inspection and servicing after installation.

Treating every double door as identical

Door swing direction, opening function, and traffic flow all affect hardware selection.

Focusing on individual products instead of the opening

Exit devices, closers, hinges, locks, coordinators, and frames should be considered as a complete door system rather than separate components.

Choosing hardware too late in the project

Early coordination between architects, door manufacturers, hardware consultants, and contractors helps reduce specification changes during construction.

A Simple Specification Checklist

Before finalizing an exit device specification, consider the following checklist:

✔ Determine whether the opening is fire-rated.

✔ Identify the traffic direction and pedestrian flow.

✔ Confirm whether both door leaves operate independently.

✔ Decide if a removable mullion is required.

✔ Evaluate long-term maintenance expectations.

✔ Consider the desired architectural appearance.

✔ Verify compatibility with the complete door assembly.

✔ Coordinate all hardware components during the specification stage.

Using a structured review process helps reduce installation conflicts and supports smoother project delivery.

Final Thoughts

Commercial exit devices are more than emergency hardware—they are an essential part of a building's life-safety strategy and day-to-day operation.

Whether a project requires a rim exit device for a removable mullion, a concealed vertical rod device for a premium office, a surface vertical rod device for a high-traffic public building, or a mortise exit device for enhanced security, the most effective solution is always the one that matches the operational needs of the opening.

As demonstrated throughout the installation guide, commercial double doors can be configured in multiple ways to accommodate different traffic patterns, fire-rating requirements, and building functions. Understanding these configuration options allows project teams to specify hardware with greater confidence and reduce costly changes during construction.

A well-specified exit device does more than satisfy code requirements—it contributes to safer evacuation, smoother daily operation, lower maintenance costs, and a longer service life for the complete door system.

By evaluating door configuration, occupancy type, fire protection needs, maintenance strategy, and architectural objectives at the beginning of a project, architects, contractors, door manufacturers, and distributors can make informed hardware decisions that deliver lasting value.

Ultimately, successful commercial door hardware specification is not about selecting the most advanced exit device—it is about selecting the right exit device for the right opening.